Cisco Catalyst C1300-24XTS Review: 24-Port 10GbE Line-Rate Testing
As AI workstations, high-performance NAS systems, and small server clusters become more common, 10GbE networking is moving beyond traditional enterprise data centers. Faster copper connections are increasingly appearing on local AI systems and storage devices, while many existing network backbones still rely on fiber. That makes switches capable of bridging copper and optical connections particularly useful.
ServeTheHome recently published a detailed teardown and performance review of the Cisco Catalyst C1300-24XTS. This fixed-configuration 1U switch combines 12 independent 10GBASE-T RJ45 ports with 12 SFP+ ports, using Marvell PHY and Prestera switching silicon.
The review went beyond a basic connectivity check. ServeTheHome connected all 24 ports to a Keysight IxNetwork test platform and evaluated throughput across multiple packet sizes and traffic profiles. It also measured power consumption and acoustic output.
The results raise three practical questions: how is the switch built, can all 24 ports forward traffic at full line rate simultaneously, and does its power and noise profile make sense for smaller deployments?
🔌 12 Copper Ports and 12 SFP+ Ports: A Hybrid 10GbE Design #
The Catalyst C1300-24XTS uses a 1U metal chassis measuring 444.3 × 273 × 43.94 mm and weighing approximately 4.2 kg. Unlike smaller models in the same product family, it occupies a conventional full-width rack footprint.
Its front-panel layout is straightforward:
- Ports 1–12 are 10GBASE-T RJ45 connections.
- Ports 13–24 are SFP+ cages.
- A separate 1GbE RJ45 port provides out-of-band management access.
All 24 data ports are independent. They are not combo ports that force users to choose between a copper connector and an optical interface sharing the same logical port.
That distinction matters when designing a mixed network. The 10GBASE-T ports can connect conventional Ethernet NICs in workstations, servers, and NAS systems using twisted-pair cabling. The SFP+ ports can accommodate optical transceivers or Direct Attach Copper (DAC) cables for connections to other switches, storage systems, and nearby rack equipment.
Consider a small AI lab with several workstations fitted with 10GbE RJ45 NICs. Those systems can connect directly to the copper ports, while the SFP+ interfaces provide links to an existing fiber backbone or a separate storage network. There is no need to insert external media converters simply to bridge the two interface types.
The SFP+ cages are arranged in three groups of four, with physical spacing between groups. ServeTheHome noted that this makes optical modules and DAC cables easier to insert and remove. The spacing also provides some separation around components that can contribute to localized heat.
A dedicated 1GbE management port is another useful feature. It allows administrative access to remain separate from production traffic, which is preferable in networks where management interfaces should not be exposed to ordinary client devices.
There is one notable hardware limitation: the switch has a single AC power input and does not support a redundant internal power supply. A deployment that requires power-source redundancy will need to address it externally, for example with an appropriately configured dual-input ATS PDU.
The overall design favors flexible 10GbE connectivity and port density rather than the higher port speeds or built-in redundancy expected from larger data center switches.
🧩 Inside the Chassis: Marvell PHYs and Prestera Switching Silicon #
ServeTheHome’s teardown provides a closer look at how Cisco implements 24 high-speed Ethernet connections in a relatively compact chassis.
The main switching PCB occupies the front portion of the enclosure. At the rear are the AC-to-DC power supply and a single centrifugal blower fan responsible for cooling the system.
That cooling arrangement differs from the multiple small axial fans commonly found in 1U networking equipment. A blower can move air through a more directed internal path, but its effectiveness depends on the chassis airflow design, component placement, and available cooling capacity.
Marvell 10GBASE-T PHYs handle the copper interfaces #
One of the prominent components beneath the large silver heatsink is a Marvell 88X3580-DGQ4. This eight-port 10GBASE-T PHY supports IEEE 802.3an, 802.3bz, and 802.3az standards.
The board also includes a separate four-port Marvell PHY, completing the physical-layer connectivity required for the 12 RJ45 ports.
A PHY, or physical-layer transceiver, sits between the switch’s digital networking logic and the physical Ethernet medium. On copper Ethernet links, it handles the electrical signaling, encoding, transmission, and reception needed to move data over twisted-pair cable.
This is a demanding job at 10Gbps. 10GBASE-T uses sophisticated signal processing to maintain reliable communication over copper cabling, making PHY power consumption and heat generation significant considerations in multi-port switch design.
Marvell’s broader multi-gigabit PHY portfolio illustrates why this component class matters. Its eight-port Alaska PHY family targets 2.5GbE, 5GbE, and 10GbE connectivity, with power efficiency and port integration among its design priorities.
Prestera chips perform packet switching #
The teardown also identified two Marvell Prestera-series devices:
- Marvell 98DX4504A1
- Marvell 98DX2530A2
Prestera is Marvell’s Ethernet switching silicon family. Unlike the PHYs, which handle the physical Ethernet links, switching ASICs process packets and make forwarding decisions based on information such as destination MAC addresses, VLAN membership, and configured network policies.
The division of labor is important. A switch needs both physical-layer devices to establish and maintain its Ethernet connections and switching silicon to move packets between those connections.
The PCB also contains a Lattice LCMXO2-1200UHC, part of the MachXO2 family of programmable logic devices. Such components are commonly used for auxiliary board-level control and management functions. However, the teardown did not establish the exact role this particular device performs in the C1300-24XTS, so its specific function should not be assumed.
Another small but interesting detail is the presence of heatsinks on the SFP+ cages. Optical transceivers generally have different power and thermal characteristics from 10GBASE-T PHYs, but they still generate heat. Local thermal management becomes increasingly relevant when several transceivers operate in a compact enclosure.
Taken together, the teardown shows a design built around separate physical-layer and switching components, with cooling provisions for both the copper and optical interfaces.
📊 24-Port Full-Load Testing: Can Every Interface Reach Line Rate? #
The most important part of ServeTheHome’s review was its all-port performance test.
The test setup connected all 24 switch ports to a Keysight IxNetwork platform. The 12 RJ45 connections were attached through a NOVUS 10/1GE 16DP test card, while the 12 SFP+ connections used a NOVUS 100GE test card.
Every switch port operated at 10Gbps. That gives the system a theoretical aggregate one-direction port rate of:
\[ 24 \times 10\text{ Gbps} = 240\text{ Gbps} \]This is the sum of the 24 individual port rates, not a claim that each port can transmit and receive 10Gbps simultaneously as a single 240Gbps one-way stream. Ethernet switching capacity is often quoted using full-duplex totals, so it is worth checking which convention a particular specification uses.
RFC 2544 testing across multiple frame sizes #
ServeTheHome used the RFC 2544 benchmarking methodology to evaluate throughput and latency. Each frame-size test ran for 30 seconds, with traffic load increased until the switch was tested at 100% line rate.
The fixed frame sizes were:
- 64 bytes
- 128 bytes
- 256 bytes
- 512 bytes
- 1024 bytes
- 1280 bytes
- 1518 bytes
The test suite also included three mixed-frame profiles: Standard IMIX, Cisco IMIX, and IPSec IMIX.
Testing multiple frame sizes is important because a switch’s performance cannot be judged by bandwidth alone. Large packets are efficient to forward in terms of packet-processing workload, while small packets require the switching hardware to process far more individual frames per second.
Why 64-byte packets are the harder test #
At 10Gbps, a port carrying minimum-size Ethernet frames must process packets at a much higher rate than a port carrying large frames.
For 64-byte frames, the C1300-24XTS achieved approximately 357 million packets per second across all 24 ports. The measured Layer 2 receive throughput was about 183Gbps, with zero packet loss.
At first glance, 183Gbps might appear to fall short of the expected 240Gbps. The difference is explained by Ethernet framing overhead.
A 64-byte Ethernet frame does not occupy only 64 bytes of transmission time on the physical link. The link also carries:
- A 7-byte preamble
- A 1-byte start-frame delimiter
- A 12-byte inter-frame gap
For throughput calculations, these add 20 bytes of wire-time overhead to each 64-byte frame. The total transmission interval is therefore equivalent to 84 bytes.
The theoretical maximum Layer 2 frame throughput is:
\[ 240 \times \frac{64}{84} \approx 182.9\text{ Gbps} \]That is almost exactly the approximately 183Gbps reported in the test.
In other words, the lower Layer 2 number does not indicate a switching bottleneck. It reflects the time consumed by Ethernet framing and the required gap between frames. The measured result is consistent with full line-rate forwarding of minimum-size packets.
Larger frames move closer to the 240Gbps limit #
As frame size increases, the fixed overhead accounts for a smaller proportion of total wire time. Layer 2 throughput therefore approaches the aggregate physical port rate.
With 1518-byte frames, the C1300-24XTS delivered nearly 237Gbps of Layer 2 receive throughput, again with zero packet loss.
The mixed-frame results were similarly strong:
| Traffic profile | Reported Layer 2 throughput |
|---|---|
| Standard IMIX | Approximately 227Gbps |
| Cisco IMIX | More than 227Gbps |
| IPSec IMIX | Approximately 229Gbps |
All three profiles sustained full line-rate traffic without packet loss in the reported tests.
The important result is not simply that the switch can move large packets quickly. It maintained the expected forwarding performance across minimum-size frames, large frames, and mixed traffic patterns while all 24 ports were active.
What the benchmark does—and does not—prove #
RFC 2544 provides a controlled way to compare network-device forwarding performance. It does not reproduce every condition found in a production network.
Real deployments may involve extensive ACL rules, QoS classification, link aggregation, spanning-tree events, multicast traffic, congestion, and combinations of features that were not necessarily active during the benchmark.
Those configurations can affect throughput, latency, and CPU or hardware-resource utilization depending on how the switch implements them.
Even with that qualification, zero-loss forwarding across all 24 ports is a strong result. It establishes that the C1300-24XTS is not merely a switch with 24 nominal 10GbE interfaces; its tested forwarding path can sustain the expected aggregate traffic load.
🔋 Power Consumption, Fan Noise, and Management #
Throughput is only one part of a switch’s operating profile. Power consumption and acoustic output can determine whether a device is suitable for a home lab, office, or dedicated server room.
Power draw depends on port population #
ServeTheHome measured the following power consumption figures:
| Test condition | Measured power |
|---|---|
| Idle, no data cables attached | Approximately 19.6W |
| One 10GbE RJ45 cable connected | Approximately 20.0W |
| One SFP+ module inserted | Approximately 28.0W |
The increase associated with an SFP+ module should not be treated as a universal per-port figure. Different optical transceivers and DAC cables have different power requirements, and link state and test conditions also influence consumption. It would be misleading to multiply the measured difference by 12 and use that as a prediction for a fully populated switch.
Cisco’s official specifications, as cited in the review, list idle power around 22–23W and maximum rated power around 86–89W. Actual consumption depends on the installed modules, active links, and operating conditions.
For a 24-port 10GbE switch, the rated maximum is useful when sizing a rack’s power budget. It also gives an indication of the thermal load that the cooling system may need to handle under demanding configurations.
Fan noise is worth considering #
ServeTheHome recorded approximately 38dBA in its test environment. The reviewers found the switch slightly louder than expected and more audible than some other models in the same product family.
That level is generally manageable in a server room or dedicated network closet. It may be less welcome in a quiet office, bedroom, or home studio, particularly if the switch is installed close to the user.
The single blower fan is part of the trade-off. A compact 1U chassis with 24 high-speed Ethernet interfaces needs to move enough air to cool the PHYs, switching silicon, power supply, and any installed optical modules.
Web management covers common SMB requirements #
The C1300-24XTS includes a web-based management interface with features expected from an SMB-oriented managed switch, including:
- VLAN configuration
- Access control lists (ACLs)
- Quality of Service (QoS)
- Link aggregation
- Spanning Tree
- Firmware management
Setup wizards help simplify routine configuration, and the overall feature set covers many of the requirements found in small enterprise networks.
ServeTheHome considered the management capabilities comprehensive and usable, although it noted that some pages loaded slowly. That is a usability issue rather than a forwarding-performance limitation, but it can make frequent configuration work less pleasant.
🏢 Where the Cisco C1300-24XTS Fits #
The C1300-24XTS is best understood as a high-density 10GbE access switch for environments that need both copper and optical connectivity.
Its 12 RJ45 ports make it practical for connecting workstations, servers, and NAS devices that already use 10GBASE-T NICs. The 12 SFP+ ports provide flexibility for fiber uplinks, DAC-connected rack equipment, and other high-speed network devices.
Potential deployment scenarios include:
- AI development labs: Connect local AI workstations over copper while linking storage and backbone infrastructure through SFP+.
- High-performance NAS environments: Provide multiple 10GbE connections for storage clients and network aggregation.
- Small server clusters: Connect 10GbE-equipped nodes without requiring separate copper-to-fiber conversion hardware.
- Mixed enterprise networks: Bring copper-based endpoints and optical infrastructure together in a single 1U switch.
There are also clear reasons to look elsewhere. Organizations requiring redundant internal power supplies, higher-speed 25GbE or 100GbE access, or the feature depth of a larger data center platform may need a different class of switch.
Acoustics are another deployment constraint. At approximately 38dBA in the review’s measurements, the C1300-24XTS is more appropriate for a rack or equipment room than an especially quiet workspace.
The benchmark results are compelling, but buyers should still validate the management features, firmware capabilities, and redundancy requirements against their actual network design.
The C1300-24XTS combines 12 independent 10GBASE-T ports and 12 SFP+ interfaces with Marvell PHY and Prestera switching silicon. ServeTheHome’s Keysight IxNetwork testing showed that all 24 ports could sustain full line-rate forwarding across the tested frame sizes and traffic profiles without packet loss.
Its strongest selling point is therefore straightforward: dense hybrid 10GbE connectivity backed by measured forwarding performance. The trade-offs are equally clear—a single power input, audible cooling, and a management interface that could be more responsive.
For small server clusters, AI labs, and mixed copper-and-fiber networks that need 24 ports of 10GbE in a 1U chassis, the C1300-24XTS presents a capable option. Its benchmark results show that the hardware can deliver on the bandwidth promised by its port configuration.